what does the exclamation point dashboard icon mean on a Chrysler town and country ?

what does the exclamation point dashboard icon mean on a Chrysler town and country ?

Asked by: Nick @ 2009-07-14 06:20:55

Answers ::
Handbrake?
maybe the switch is faulty

Simples xD

same thing as a big red stop sign means stop what your doing check STOP ! look out ! Help ! ! means now !!!

kelly_f_1999

Your park brake is on

Chris

It is the tire pressure sensor.
It comes on when you have low tire pressure on one or more of your tires.

Russ

Russ A

Is it inside a triangle? It is probably the warning flasher button...

J B

its is your low pressure tire sensor, all newer vehicles have them, its the same thing on my moms jeep grand cherokee, so if i were you i would check your tire pressurwe bc it means u have a low tires.

ccprt

PT Cruiser, has anyone experienced the same problem?

I have a 2005 pt cruiser with 74000 miles on it. As I was driving the other day it started cutting out when doing 60 mph and the engine light came on. It is not making any noise or acting any different when driving below 60 but the engine light is staying on. If anyone has any ideas your answers will be greatly appreciated.

Asked by: shadylynne @ 2009-07-13 06:12:21

Answers ::
bad spark plug maybe
bad spark plug wire maybe
bad tank of fuel maybe

easy to go have it check or scan try autozone or any parts store many scan for free

kelly_f_1999

sounds like either an electrical issue or fuel issue.

Go to your local parts store and ask them to test your alternator & battery. Most will do that for free.

Next if that comes up problem free I would have my fuel filter changed, put some lucas fuel injector cleaner in with your next full tank of gas, and possibly have your fuel pump looked at.

If after all of that you still have issues it's probably some type of sensor. Mustangs tend to do that when the idle air control valve goes bad.

Jimmy

Sounds like a sensor. Go pull the code at an auto zone. Speed sensor?

Kimberly

I, personally don't know what it is but my 02 pt bruiser has done the same thing before but then it just suddenly quit one day...

Nolan

Where can i buy new parts for a 1956 chrysler 300,for example Tail lights?

I looking for the tail lights for my 1956 chrysler 300,I need new parts not used.thanks

Asked by: ini300 @ 2009-07-13 13:50:13

Answers ::
For an auto that old unless there is someone making reproductions it may be hard to find a new one. Check ebay and other auction sites often. Also there are swap meets where people sell or buy auto parts just like a huge yard sale for autos and parts. At theese there are people that clean out their garage and may have a used one or even a new one that could have been on a shelf somewhere for 30 or more years. Occasionally there is someone who has purchased stuff from a dealer that was going out of business and may have had one in stock forever. Finding theese meets you need to check on the internet, look in auto magazines, talk to people that show cars or belong to a club etc... My suggestion is if you find one used that is fairly priced you better buy it because there isn't that many of them around for the vehicle you have and finding a new one may take years. Even if you buy a used one that is not in great condition it will look better than having one missing or broken while you keep looking for a new one. I wanted a specific engine part at one time and read a book printed in 1975 that told how few were produced and they were quite hard to find back then. I found what I wanted at a swap meet 3 months later and within 2 years I owned 7 of them but then again There is something I wanted in 1992 and couldn't find so I had to modify something else but just yesterday while on ebay I saw a new one at a good price because there is now someone reproducing them now that I'll never need it. Talk to participants of auto shows a lot of times they looked for years to find something and know how frustrating it can be so they are normally very eager to help if they have any idea of who might have what you need.

Jimbob

http://autoparts.allpar.com/auto-parts/1956-chrysler-300/performance
http://www.chryslerclub.org/reproduction.html

hemifury

JC Whitney?

Jackolantern

What would cause this in a 2004 Chrysler Sebring?

My car has been running beautifully and all of a sudden the engine light came on today. Any tips or suggestions? Its a 2004 Chrysler Sebring sedan.

Asked by: sweetsupplies85 @ 2009-07-13 18:16:02

Answers ::
The engine light coming on means there is a code. You need to have someone pull out the code and it will tell you whats wrong.

thlslsborlng

It can mean different things on different cars. It probably just isn't running at maximum efficiency. Someone like Midas can check that out for you, if you don't want to take it to a dealer. You can still drive on it though.

webjnke1

Theres literally like 500 different trouble codes that can turn the light on. There is a trouble code stored in the cars computer. One of your sensor's may be acting up. It could just be a loose gas cap. etc. etc.
You'll need to have someone plug into the cars computer to retrieve the code number which will tell them which sensor may be the problem and so on.

Frankie Coletta

What is the best diagnostic scanner for a Chrysler Sebring?

Asked by: sweetsupplies85 @ 2009-07-13 16:56:14

Answers ::
probably an actron

Todd A

any really. they all do the same thing. just make sure it's for ODB2

carfreak311

DRB3

jp#5