Would a 2001 chrysler sebring 6 cylinder be a bad purchase or are they ok cars?

Question 1
Would a 2001 chrysler sebring 6 cylinder be a bad purchase or are they ok cars?...  

Answers
1)   I have been a chrysler tech for about 7 years and have just about seen it all my advice would be hell no but im sure there are plenty of happy sebring owners out there that would disargee I now work for Toyota and I would have to say that is the better choice it may cost more but in the long run your better off with a Camry or a Corrola maybe a Honda Accord or Civic Nissan Altima or Sentra. I know its bad to trash American cars like that and I hate to do it but those are the facts not all American cars are bad like that the sebring that year has a Mitsubishi engine if it has a 2.5L V6 witch had many problems like oil leaks from every point it had a oil seal and distributer electrical problems the 4cyl engine is the better way to go if you are set on buying a Chrysler car - Dennis

2)   they suck check out this website - chris

3)   not at all. Chrysler's are bad vehicles. check out consumer reports and look at their best used cars. - Ed Bermeo

4)   Ive had a Sebring for almost 6 months now, and i havent had one problem with it. Ive hit shit and been hit and there still isnt one dent on the body, its pretty durable. Its not exactly fast, well its not fast at all but i guess if you luck out like i did its a good choice - Matt Chionchio

5)   It would depend on how high the mileage is . Look at the oils to see if they are burnt. Does it smell inside the car? AC could be leaking. Get a compression test all should be fairly even and over 110, Look in the glove box for old maintenance records . If you can get a buyers kit from the DOT this will tell you the last three owners. If one of them owners is a wrecking yard , walk away , no run away. Because it has been totalled and has been patched up. - Donny


_____ powerd by Yahoo!Answers ________
Question 2
Why does my Plymouth starts to shake at 50-55 MPH?...  I bought this Plymouth Acclaim for 400 dollars and we registered it and put a new muffler on to pass inspection etc.. The car runs great but once we go 50-55 MPH the car starts to shake horribly like a flat tire. Funny thing is under 50 it does not shake and it is smooth and it drives straight and when it is above 60 it is still smooth and it drives great. Any advice would be appreciated. Thank you very much :)
No I don't see any oil leaks.

Answers
1)   Most likley the wheels need to be balanced or rotated. It could also be just old tires I had problems with my alignment and it was solved with a new set of tires and a balance which is usually standard with purchase. - Zeke1r

2)   Check the balance on all four wheels before doing anything else, and get them balanced if necessary. Also check the shocks, and if any are worn, replace them. Zeke is right about having the alignment checked, front and back, as well. Those three areas are responsible for almost all speed-sensitive vibration. - TitoBob

3)   You should probably get your tires balanced because sometimes a little bit of weight difference can only be noticed at higher speeds, other than that I can only think of an bad wheel alignment but I would probably check your tire balance first. Hope this helps. Thanks, Peace.
~Sunshine777888 - Patrick

4)   I agree with titobob check the balance and the tires for flat spots shocks will cause that too maybe a bent wheel or a bent cv axle a bad bearing in the diff part of the transmission are you leaking any trans fluid? mud in the wheels,maybe some body put a used tire on the car and didnt get the water out of it check the simple things first - Dennis

5)   You might have a wheel weight missing from one of the wheels. Is the shaking mostly in the steering wheel or is it more noticeable in your seat? If in the steering your front wheels are out of balance and if you can feel it in your seat the rear wheels are out of balance or the problem is in the rear area. I would also think that if a CV boot is ripped all the grease will be gone, you can count on the CV bearings bad. - Donny


_____ powerd by Yahoo!Answers ________
Question 3
Wanting to change halogen bulbs?...  I have a 2007 Chrysler Sebring with the 2.4L. I want to change the current halogen bulbs to LED. What I want to know is if I would be taking a risk of damaging a controller if there is one or wasting my time cause of a logic issue with the controller detecting the low amperage and shutting down the circuit? I have read that some cars have the CAN running the lighting system and I attempted the change with the high beam bulbs and the car would shut the circuit down while the car is in control.

The reason for the change is I wanted to utilize the LED bulbs in conjunction with my emergency lighting. I was going to put diodes in place to prevent backfeed to the car system.
Thank you for the input as far as the light not being legal but I'm seeking to replace 3157 & 921 bulbs with LED versions. Like I stated early my concern is the car systems (CAN) if it controls the lights in any way to damage the electronics of the car.

Answers
1)   The LED version of the 9004/9007 lamp is for fog light or daytime running lamp use only. Does not put out enough light power to be used as headlamps. - Mike B

2)   Mm... It maybe help. http://inhut.info/427915/emergency-light - kuczma leshko

3)   AMAZING! Is that what you want? http://yourselect.info/121484/emergency-lights - Cheek Rice


_____ powerd by Yahoo!Answers ________
Question 4
02 pt cruiser 2.4?wont shift out of first?...  02 pt cruiser 2.4?wont shift out of first

Answers
1)   Most likely the trans is in "limp home" mode. Time to have the trans checked.

Any MIL codes on the odometer? Follow instructions at the site. - Mike B

2)   its in fail safe which is second gear can have one of several problems as in trans controller,input or output speed sensor or solenoid assembly if a check engine light on will help narrow it down but trans shop will help you out if it is indeed in first gear then only internal problem which means rebuilt - bo

3)   I'm more of an engine man but i had this problem in my 1999 dodge durango which is a Chrysler product but it sounds like a speed sensor you can try to fix it bu unhooking the negative battery for about an hour and putting it back on and taking it for a drive to see if that helped. - Bryce


_____ powerd by Yahoo!Answers ________
Question 5
I have a 2003 pt cruiser. I have had the starter replace 4 times. Everyone says that is what the problem is.?...  Sometimes it won't start. Twice I have been driving it and it completely dies. Everything, including brakes and steering completely stops. The whole thing shuts off. It is sitting in my driveway now and won't start. What could this be?

Answers
1)   a starter wouldnt cause the car to die while driving, its sole purpose is to start the car. a bad starter would typically click once when u turn the key and thats it. whatever caused ur car to die while driving is probably related to it not starting. could be a bunch of things though, so i'd have it towed to a mechanic for proper diagnosis - Steven

2)   It could be the ground connection. Follow the wire from the negative (-) terminal on your battery to where it is attached to the body of your car...sometimes they get loose or corroded. - Trashy

3)   I believe that you have a bad ground connection unless you know where all the grounds are at it can get kind of confusing so unless you are confident in working on your own car i would take it it a local mechanic but not the same one you have been taking it to for the starter because they completely ripped you off with 4 starters because any real mechanic would know that a starter can not cause the random dieing the only reason to have a starter replaced is because it ether stops working completely or draws to many amps to work properly. so ya i think that you have a bad ground connection somewhere but i do not know where it is it could be lots of places - Bryce


_____ powerd by Yahoo!Answers ________

Would a 2001 chrysler sebring 6 cylinder be a bad purchase or are they ok cars?

Question 1
Would a 2001 chrysler sebring 6 cylinder be a bad purchase or are they ok cars?...  

Answers
1)   I have been a chrysler tech for about 7 years and have just about seen it all my advice would be hell no but im sure there are plenty of happy sebring owners out there that would disargee I now work for Toyota and I would have to say that is the better choice it may cost more but in the long run your better off with a Camry or a Corrola maybe a Honda Accord or Civic Nissan Altima or Sentra. I know its bad to trash American cars like that and I hate to do it but those are the facts not all American cars are bad like that the sebring that year has a Mitsubishi engine if it has a 2.5L V6 witch had many problems like oil leaks from every point it had a oil seal and distributer electrical problems the 4cyl engine is the better way to go if you are set on buying a Chrysler car - Dennis

2)   they suck check out this website - chris

3)   not at all. Chrysler's are bad vehicles. check out consumer reports and look at their best used cars. - Ed Bermeo

4)   Ive had a Sebring for almost 6 months now, and i havent had one problem with it. Ive hit shit and been hit and there still isnt one dent on the body, its pretty durable. Its not exactly fast, well its not fast at all but i guess if you luck out like i did its a good choice - Matt Chionchio

5)   It would depend on how high the mileage is . Look at the oils to see if they are burnt. Does it smell inside the car? AC could be leaking. Get a compression test all should be fairly even and over 110, Look in the glove box for old maintenance records . If you can get a buyers kit from the DOT this will tell you the last three owners. If one of them owners is a wrecking yard , walk away , no run away. Because it has been totalled and has been patched up. - Donny


_____ powerd by Yahoo!Answers ________
Question 2
Why does my Plymouth starts to shake at 50-55 MPH?...  I bought this Plymouth Acclaim for 400 dollars and we registered it and put a new muffler on to pass inspection etc.. The car runs great but once we go 50-55 MPH the car starts to shake horribly like a flat tire. Funny thing is under 50 it does not shake and it is smooth and it drives straight and when it is above 60 it is still smooth and it drives great. Any advice would be appreciated. Thank you very much :)
No I don't see any oil leaks.

Answers
1)   Most likley the wheels need to be balanced or rotated. It could also be just old tires I had problems with my alignment and it was solved with a new set of tires and a balance which is usually standard with purchase. - Zeke1r

2)   Check the balance on all four wheels before doing anything else, and get them balanced if necessary. Also check the shocks, and if any are worn, replace them. Zeke is right about having the alignment checked, front and back, as well. Those three areas are responsible for almost all speed-sensitive vibration. - TitoBob

3)   You should probably get your tires balanced because sometimes a little bit of weight difference can only be noticed at higher speeds, other than that I can only think of an bad wheel alignment but I would probably check your tire balance first. Hope this helps. Thanks, Peace.
~Sunshine777888 - Patrick

4)   I agree with titobob check the balance and the tires for flat spots shocks will cause that too maybe a bent wheel or a bent cv axle a bad bearing in the diff part of the transmission are you leaking any trans fluid? mud in the wheels,maybe some body put a used tire on the car and didnt get the water out of it check the simple things first - Dennis

5)   You might have a wheel weight missing from one of the wheels. Is the shaking mostly in the steering wheel or is it more noticeable in your seat? If in the steering your front wheels are out of balance and if you can feel it in your seat the rear wheels are out of balance or the problem is in the rear area. I would also think that if a CV boot is ripped all the grease will be gone, you can count on the CV bearings bad. - Donny


_____ powerd by Yahoo!Answers ________
Question 3
What Year Is This Chrysler 300?...  http://hphotos-snc6.fbcdn.net/194583_1595446415352_1511705061_31196312_5220458_o.jpg
http://hphotos-snc6.fbcdn.net/209235_1596403119269_1511705061_31198066_3640969_o.jpg

There is a circle with a 300 in the centre near the left backseat door's window, and the back has the same circled 300 with the word Chrysler beside it. I'm having trouble identifying the exact year. As you can see in the picture of the front, there is no letter so (I'm assuming) it isn't part of the 300 letter series, but the only Chrysler 300 non letter car that I know of (Besides the newer ones) is the 1965 Chrysler 300, which has a few noticeable differences as well. Any Chrysler experts want to help me out? Thanks so much!

Answers
1)   It's definitely a 1965 or 1966. - TaurusSHO97

2)   1966 - John

3)   Didn't believe me last time around??? - Dennis


_____ powerd by Yahoo!Answers ________
Question 4
Wanting to change halogen bulbs?...  I have a 2007 Chrysler Sebring with the 2.4L. I want to change the current halogen bulbs to LED. What I want to know is if I would be taking a risk of damaging a controller if there is one or wasting my time cause of a logic issue with the controller detecting the low amperage and shutting down the circuit? I have read that some cars have the CAN running the lighting system and I attempted the change with the high beam bulbs and the car would shut the circuit down while the car is in control.

The reason for the change is I wanted to utilize the LED bulbs in conjunction with my emergency lighting. I was going to put diodes in place to prevent backfeed to the car system.

Answers
1)   The LED version of the 9004/9007 lamp is for fog light or daytime running lamp use only. Does not put out enough light power to be used as headlamps. - Mike B

2)   Mm... It maybe help. http://inhut.info/427915/emergency-light - kuczma leshko

3)   AMAZING! Is that what you want? http://yourselect.info/121484/emergency-lights - Cheek Rice


_____ powerd by Yahoo!Answers ________
Question 5
2002 Sebring LX Help!?...  Im trying to remove part of my exhaust on my car, does anyone know if somewhere along the exhaust piping is there a flange or anything like that or will have to completely unbolt it from the manifold? I havnt even looked my self yet, i was just seeing if anyone knew, any knowledge is appreciated.

Answers
1)   There is a clamp that holds the muffler on if you are tring to put a different muffler on there should be a clamp or a bolted on flange at the converter but good luck on getting those loose without a torch to heat them up if you break them off while tring to get them loose you can always drill them out and put a bolt and nut on them - Dennis

2)   You got me...I find this.http://foxbuy.info/429862/flanges - Auten Mcmillian

3)   AMAZING! Is this what you are looking for? http://yourcares.info/429847/flange - Aline Edward


_____ powerd by Yahoo!Answers ________

How do you fix a coolant leak on a 99 Chrysler Cirrus?

Question 1
How do you fix a coolant leak on a 99 Chrysler Cirrus?...  Possible fixes?
Tips?
Advice?
I just bought this car about 2 months ago and 2 weeks after I bought it, I noticed a coolant leak. It was just a minor hassle at first, I just had to top off the coolant every couple of days. Then the car extremely overheated and wont hold coolant. I figured it was the water pump. I attempted to repair it myself, but had trouble. Is this something I could fix, or should I have the car taken to a shop? Thanks

Answers
1)   Coolant leaks are usually the result of tubing. If you know absolutely nothing aboit cars, yes, tale it to a shop. But because of mechanic prices, I would try to find someone who knew how to fix it first :) - Rebekah

2)   There's no answer for your question. You have to get it inspected. Have someone pressure-test the cooling system and figure out where the leak is. Then you can figure out how much it will cost. Don't assume it's the water pump. - Bill

3)   get some coolant leak fix with the little beads in it, as soon as it stops leaking sell it. Chrysler products are junk; although they are smooth. Its going to happen again once you fix it. - James

4)   First you need to make sure from where its leaking if the radiator is bad I recommend buying a new one and changing it yourself because mechanic is no superman and charges like is no ones business if you have the tools just be observant how to remove the part. - Mr.JollyJacksonAndrews


_____ powerd by Yahoo!Answers ________
Question 2
my 91 chrysler won't shift why ?...  91 lebaron with a V6 . Tranny seems strong other than not shifting up

Answers
1)   well first of all ur clutch is not working properly or probably ur gearbox is dead that are the only reasons - vineet

2)   If you know what your kick down linkage is, take a look at this to make sure it is free . If it is seized on it won't let the trans shift up it will stay in low.
If this is ok look at the trans oil and smell it . If it smells burnt you need to get to get it to a transmission shop. you might look at a $2000.00 bill - Donny

3)   Does it have a 3 speed or 4 speed trans? If a 3 speed, the throttle linkage could be stuck or you may have a bad speed sensor. I don't know if that trans had a governor yet but if it does, it can be stuck. If it is a 4 speed it probably is in limp-in mode (2nd gear). Have the fault codes checked to help with the diagnosis. Good luck. - Dennis

4)   Shift solenoid pack could be faulty. - Dennis


_____ powerd by Yahoo!Answers ________
Question 3
Why does my Plymouth starts to shake at 50-55 MPH?...  I bought this Plymouth Acclaim for 400 dollars and we registered it and put a new muffler on to pass inspection etc.. The car runs great but once we go 50-55 MPH the car starts to shake horribly like a flat tire. Funny thing is under 50 it does not shake and it is smooth and it drives straight and when it is above 60 it is still smooth and it drives great. Any advice would be appreciated. Thank you very much :)
No I don't see any oil leaks.

Answers
1)   Most likley the wheels need to be balanced or rotated. It could also be just old tires I had problems with my alignment and it was solved with a new set of tires and a balance which is usually standard with purchase. - Zeke1r

2)   Check the balance on all four wheels before doing anything else, and get them balanced if necessary. Also check the shocks, and if any are worn, replace them. Zeke is right about having the alignment checked, front and back, as well. Those three areas are responsible for almost all speed-sensitive vibration. - TitoBob

3)   You should probably get your tires balanced because sometimes a little bit of weight difference can only be noticed at higher speeds, other than that I can only think of an bad wheel alignment but I would probably check your tire balance first. Hope this helps. Thanks, Peace.
~Sunshine777888 - Patrick

4)   I agree with titobob check the balance and the tires for flat spots shocks will cause that too maybe a bent wheel or a bent cv axle a bad bearing in the diff part of the transmission are you leaking any trans fluid? mud in the wheels,maybe some body put a used tire on the car and didnt get the water out of it check the simple things first - Dennis


_____ powerd by Yahoo!Answers ________
Question 4
What type of battery does a 1999 Chrysler Concord take ?...  What battery does a 1999 Chrysler concord take ?

Answers
1)   For a 3.2L MFI 6cyl

Part Number: 34-DLG
Weight: 37.5 lbs
BCI Cold Cranking Amps Value: Tested to BCI Standard
Battery Height: 200 mm - 7 7/8 in
Battery Length: 260 mm - 10 1/4 in
Battery Width: 173 mm - 6 13/16 in
Cold Cranking Amps (CCA): 800
Core Charge Applicable: Yes
Voltage: 12

Go to the parts store. They'll tell you - Katie W.R.

2)   a 12 volt optima bateryy - Arron

3)   Better get the exact type it needs, as it fits through right front wheelwell - done wrenching


_____ powerd by Yahoo!Answers ________
Question 5
Which Edelbrock Performer Carburetor is the correct fit for a 1969 Chrysler Newport?...  Vehicle already has a stock 2 barrel Carburetor, V8 383 block engine. Thanks!

Answers
1)   750cfm - Mr.JollyJacksonAndrews

2)   I am assuming you are converting to a 4 barrel carburetor?

In that case you need to say a bit more on if you are changing gearing, cam or anything else and what intake you are going to use (stock 383?)

If you are staying with the stock gearing and everything else a 600 would be fine - roadrunner426440

3)   Install a good aluminum dual plane four barrel intake manifold, and a four barrel of 600 CFM.

Do NOT install a larger carburetor unless you're changing cams. - Don't know everything !


_____ powerd by Yahoo!Answers ________

What would be a good trade in value on a 2002 Chrysler PT Cruiser Limited with no engine?

Question 1
What would be a good trade in value on a 2002 Chrysler PT Cruiser Limited with no engine?...  The question says it all. I took it to a dealer last night to trade in on a new car and the dealer offered $100 for it. I thought that was ridiculous. The inside is just about immaculate. Leather, sunroof, heated seats. I took some pictures on my phone just in case. The only problem is that the engine finally went out on it last week, so it needs a new one of those. What's your opinion? Thanks!

Answers
1)   I agree with you bec some are offering much more in trade in values even if the vehicle is a scrap car. - helpful bob

2)   Trade in value at a dealership is $0, they will just scrap it. The only reason they offer you $100 is to sell you another car, you can do better trying to sell it to some one that wants to fix it. Also you will get a better deal with "no trade in" - Dennis

3)   I have a zero miles engine ready to install in your car so send me pictures description and a good price
touring or limited only
thank you - conejote_99

4)   Check your local paper for junk dealers, most are offering $200-300 for a "junk" car. A salvage yard may give you a little more if the body and interior are in A-1 condition. - Don't know everything !

5)   Depending on the mileage and condition, that car, running and driving, would be worth anywhere from about $2000 to $3500. The problem is that the car is not running, and it needs an engine. To put a rebuilt engine in would cost in the area of $2500, and a used (junkyard) engine would be in the $1400 range (if they can find a good one).

The dealer has no way to know if the transmission (a common problem) is good or not, nor can they test drive the car to find other problems.

A new car dealer is not going to fix that car. They will sell it to a wholesale dealer who may put a motor in it, or they may just sell it for scrap. The dealer really does not want your car. If is going to be more problems (having to tow it) than any potential profit is worth.

You have three choices.

You can sell your PT either to a private buyer or a junk dealer

You can donate your vehicle to a 501c3 charity and get a tax write off

You can have a motor put in the car yourself, and drive, sell or trade the running car - fire4511

6)   It probably sold in 2001 so that makes it 10 years old. The Blue Book probably won't allow much even with the engine running. So maybe a salvage yard will give you more than a dealer. - Jackolantern

7)   You're better off selling your car for the parts that remain. You'll make bigger profits by doing so. - мᴀD Dσɢ


_____ powerd by Yahoo!Answers ________
Question 2
i have a 2000 sebring i was driving it and it was like it went into neutral no noise the fluid is full?...  

Answers
1)   its gonna be fine. - Bill

2)   What on earth are you saying. Are you talking about when the clutch is off, are you driving an auto or manual? There's no details in your question, expect to find no details in your answers.
By the way the Sebring is a terrible car, my next door neighbor bought one and the roof was always breaking and the car was always making noises, especially the grinding transmission. - FlareKR

3)   Have you been having the transmission filter replaced and the transmission flushed every 60,000 miles?

Might be a clogged filter. Are you sure the shifter didn't pop out of Drive?

Could also be the transmission relays...I've heard there were issues. - cato___

4)   Could be a vacuum hose, relay or the transmission filter is clogged. - The Brain

5)   I am thinking it is an automatic. Do you have any gear at all. forward or reverse? You might have blown a clutch pack. Look to see if the oil smells burnt. If so take to a dealer or trans specialist. - Donny


_____ powerd by Yahoo!Answers ________
Question 3
Is a Chrysler 300 a girls car?...  Im looking at getting one but my friend says its a girls car. Whats your opinion?

Answers
1)   no and h3ll no - Steve

2)   Your friend is a fool. Laugh at him. - Dewey's Dad

3)   no way i have one is a big car maybe the sebring is a girls car not the 300 - conejote_99

4)   just stay out of trouble save yourself some money and buy a better car avoid a headache - Fermando

5)   No - Tiffany


_____ powerd by Yahoo!Answers ________
Question 4
What should I look for in a 2004 Chrysler PT Cruiser?...  My dad has been telling about stuff like 4 cylinder cars break easily, especially if they're used and whatnot. The PT Cruiser I've been looking at has 65,000 miles and it appears to be in immaculate condition. Is there anything I should look for?

And should I avoid 4 cylinder cars?
Engine: http://forsaleadsonline.com/aby7ENY/1090901/kmvDO_800600.jpg

Odometer: http://forsaleadsonline.com/aby7ENY/1090901/noqES_800600.jpg

Car: http://forsaleadsonline.com/aby7ENY/1090901/bptuB_800600.jpg

Answers
1)   In my opinion,

You should avoid a PT Cruiser.....many problems around 90k...Struts, control arms, multiple engine issues, not to mention the timing belt should be replaced around 90k and that is about $800. Do not avoid 4cyl cars they can be very fuel efficient and very reliable. Honda's, Nissan's, and Toyota's 4cyl are all very proven cars.

Good luck on your search - Clay c

2)   You should look for a way not to buy it. You can make a car look great on the outside and the interior but keeping it running and dependable are two different stories. I have known two people that have owned them and they spent more on repairs than the car is worth. Keep looking and take any used car to a quality mechanic for an inspection before you buy it. - Norma

3)   "And should I avoid all chrysler cars?" [fixed it for you]

Yes. Yes, you should.

Pt cruiser is a pile of something inside and out. Unfortunately they don't ship with a box of tissues for the crying you'll be doing on the side of the road in the middle of nowhere. Don't think buying a new one will help you...they're currently having a problem with spontaneous combustion across the line. - Hank Scorpio

4)   Avoid THIS car at any cost.

There are MANY good cars that will serve you better, most of them Japanese and 4 cylinder. Have a look at the old favourites, Corolla, Pulsar, Mazda 323. You can't go far wrong. Your dad is wrong in this event - sorry! - LarryO

5)   I have 2 pt cruiser at the moment and i sold two in the past , and i never have any serious problems with any of them , i have a 2004 gt and 2003 ht with 70k miles not a single problem in the past year

i sold a 2002 limited 11k miles and 2001 limited 5 speeds 105k miles
yes i replace the lower control arms and timing belt but
almost all cars need a timing belt when they get near 100k miles

also this cars are fun to drive good luck and don't pay over
go to this forum and read more $ 6500 - conejote_99


_____ powerd by Yahoo!Answers ________
Question 5
why does chrysler sucks?...  chrysler sucks real

Answers
1)   Because they are American made cars - Tiffany

2)   There was that super bowl commercial with Eminem on the Chrysler 200 which also sucked like hell. - Chris

3)   Because they are a fiery italian brand, silly! :)

http://www.autoblog.com/2011/04/12/2011-dodge-challenger-torched-on-assembly-line-due-to-unattended/
http://www.autoblog.com/2011/04/11/video-dodge-durango-catches-fire-during-d-c-cherry-blossom-par/
http://www.youtube.com/watch?v=Es4YPTMwRAU
http://www.autoblog.com/2011/04/11/report-china-suspends-jeep-wrangler-importation-over-safety-con/ - Jacque M

4)   You can get a lemon in any kind of vehicle. It is basically the luck of the draw. There are car owners that are reluctant to follow the maintenance sheduals set out by the manufactures. This causes the vehicle to turn into a lemon from lack of up keep. - Donny

5)   Everyone who say that are losers who can't afford one. - Dennis Paulie


_____ powerd by Yahoo!Answers ________